News Center

           

Pay attention to current events and master the first hand Xinfeng Information

Introduction of belt conveyor idler group

Belt conveyor roller sets mainly include: trough rollers, buffer rollers, parallel rollers, self-aligning rollers, etc.; specifications from 89 to 219, installation according to different belt conveyor models; currently including iron Quality rollers, ceramic rollers, rubber rollers, etc.; roller set is one of the most used parts of belt conveyors and the most convenient maintenance.

Groove rollers: ordinary rollers, forward tilt rollers, quick-change bearing rollers, hanging rollers, triple chain rollers, reversible rollers, variable groove angle rollers, transition rollers, V-shaped roller, etc.;

Parallel rollers: ordinary rollers, comb rollers, forward tilt rollers, steel rubber rollers, spiral rollers, etc.;

Self-aligning rollers: universal rollers, friction reversible rollers, powerful rollers, cone rollers, spiral rollers, combined rollers, etc.;

Buffer rollers: spring plate rollers, buffer ring rollers, powerful buffer rollers, adjustable elastic rollers, hanging rollers, etc.;

Ceramic roller: ceramic roller is referred to as porcelain roller conveyor idler manufacturers.

The belt conveyor roller is the most important part of the belt conveyor, and it is also the most important part of the belt conveyor. The belt conveyor roller is different from the unpowered roller used for material transportation, although the composition and appearance are similar. However, the carrying capacity of the belt conveyor roller is relatively large, and there are corresponding restrictions on the speed.

Roller types

Groove top idler: The standard groove angle of the groove top idler is 35 degrees, so the 35-degree groove-type idler and 35-degree groove-type forward-inclined idler are the most used in each conveyor;

Buffer roller: The buffer roller has 35 degrees and 45 degrees. When the canvas conveyor belt is selected, only 35 degrees trough buffer rollers can be used. When using a 45-degree trough-shaped buffer roller, you can use a 45-degree trough-type roller in the section where the guide trough is not impacted by the material;

Transition rollers: Transition sections should generally be set for conveyors with large capacity, long distance, high belt tension and important conveyors;

Return roller: The return roller is also called parallel lower roller, which is also the most used type of lower roller;

Self-aligning roller: Self-aligning roller includes ordinary self-aligning roller, friction self-aligning roller and tapered self-aligning roller. The self-aligning roller is used to automatically correct the excessive deviation of the conveyor belt during operation to ensure the normal operation of the conveyor.

Roller maintenance

Since belt conveyor rollers account for the largest number of belt conveyor parts, maintenance is particularly important for belt conveyor rollers; belt conveyor rollers must be maintained in a dry environment during use. Replace the damaged roller in time; clean up the material attached to the roller in time; keep the roller surface clean.

0